The Stain Remover by Indigo Individual

• is not subject to dangerous goods regulations or labeling requirements,
• is skin-compatible and dermatologically harmless (except for eye contact and swallowing, normal for soaps, creams and shower gels)
• is simply covered with a wide brush (not supplied)
• is designed to act for 12 hours,
• in the applied state, is "solid as icing" after app. 6-7 hours and can be crushed and washed off after 12 hours,
• has an active "12 hour post-effect" effect after these 12 hours of exposure time, again showing a fading effect of approximately 50% within these 12 hours,
• is supplied in a flat white cream can with 35 ml content and
• has a shelf life of one year with cool storage.

Application scenarios

Normal application for faint coloration

Apply the cream for 12 hours, then crumble and wash off, look at the result, simply leave to soak for another 12 hours and check again the result.

Then apply the cream again and repeat the procedure.

In this way the stain removal takes place under observation and doses in the application quantity of the cream, whereby one can save here naturally the quantity of the used cream.

Increased application for very strong coloring

Apply the cream for 12 hours, then crumble and wash off and repeat this twice.

3x application of the cream successively

Subsequently, the coloring is almost completely removed.

The after-effect effect, which is now no longer undertaken, is now about 24-36 hours, where the coloring has completely disappeared.

If not, you can again perform the "normal application".

Scope of delivery, handling, storage, durability and surface performance

Delivery

The cream is delivered in a flat, white and neutral PP (polypropylene) cosmetic can with a sealing film and a filling quantity of 35 ml.

Storage

After delivery to the customer, it is recommended to store the cream in the refrigerator for the first time for one day and then for further storage.

Durability

The recommended shelf life of the cream is 1 year from manufacture.

Performance

With the contents of one can, an area of ​​approx. 350 cm² can be covered under normal use.

Example of a possible application environment:

5 applications of 70 cm² each

Currently tested materials

The stain remover cream has been used successfully and thus naturally in material-harmless manner in the following materials:

• Jinshan TPE material (WM Doll, OR Doll, YL Doll)
• Silicone by Dollsweet
• Silicone by 4woods

Effect, after-effect, application

The stain remover cream itself does not penetrate directly into the TPE and silicone material because of the water-soluble components.

However, the components contained develop a capillary and depth effect (air exchange) in the TPE and silicone material, as a result of which material-specific dyeings and soiling can dissolve very quickly over a short period of time.

Within 12 hours after application, the cream already develops a very high removal power.

Subsequently, after the cured cream has been removed, an additional after-effects effect occurs, which also lasts for about 12 hours and continues to drive the stain removal very much further without the cream being applied.

With this after-effect effect, the stain removal cream can be applied efficiently, controlled and sparingly.

The cream also has the property of being cured after appli- cation (about 6-8 hours), which makes it very easy to crumble and remove.

On closer inspection, it can be seen that air bubbles, exuded by the capillary action and the air exchange, have sprung up here.

Remaining remains are simply washed with some water and soap.

The cream is recommended to be covered with a wide brush.

As the cream is not absorbed, this process is more like pushing the cream onto a smooth surface.

The goal always has to be that the background of the cream is always clearly covered.